Initializing Nc Card Memory - Mitsubishi Electric CNC MELDASMAGIC Series Instruction Manual

4.3.3.4 Initializing NC Card Memory

Initialize the NC Card memory when starting up NC Card for the first time or replacing the battery of
NC Card.
!
CAUTION
All the memory information (such as parameters, machining programs, and ladders) in NC
Card is erased when the memory is initialized. When initializing the memory of the NC Card in
use, be sure to back up the parameters and so on, as needed, prior to initialization.
Initialize the NC Card memory according to the procedures below.
Open the "Settings" page of the NC System Device Driver's Properties screen, and clear the
NC Card memory.
[Procedures]
(1) Double-click the "Numerical Controller" icon on "Control Panel."
The "Numerical Controller" window appears.
Click "MELDASMAGIC64 (HR62xx)" on the "Devices:" field of the "Numerical Controller" window,
and then click the [Settings...] button.
For the method of displaying Control Panel, refer to chapter 4.3.3.3 "Confirming NC System
Device Driver's Operation."
Downloaded from ManualsNet.com
4. Setting up MELDASMAGIC64 System
4.3 Setting Up NC Card and Device Driver (ISA Card)
search engine
62