Mitsubishi Electric CNC MELDASMAGIC Series Instruction Manual page 47

Confirm the device status of NC System Device Driver
[Procedures]
(1) The "System Properties" window appears. Click the "Device Manager" tab. Select "Mitsubishi
PC-Based NC MELDASMAGIC64 (HR62xx)" below "Other devices," and then click the
[Properties] button.
(2) The "Mitsubishi PC-Based NC MELDASMAGIC64 (HR62xx) Properties" window is displayed.
If the message of "This device is working properly" is displayed in the "Device status" field, the
device is in the normal condition.
Downloaded from ManualsNet.com
4. Setting up MELDASMAGIC64 System
4.3 Setting Up NC Card and Device Driver (ISA Card)
search engine
41