Mitsubishi Electric CNC MELDASMAGIC Series Instruction Manual page 51

(4) Click [Next >].
(5) A window for selecting the device to be installed is displayed.
Select the [No, the device isn't in the list] option button, and then click [Next >].
* This window may not be displayed according to environments.
(6) A window confirming the automatic detection of new hardware is displayed.
Select the [No] option button, and then click [Next >].
Downloaded from ManualsNet.com
4. Setting up MELDASMAGIC64 System
4.3 Setting Up NC Card and Device Driver (ISA Card)
search engine
45