Figure 4-8 4 Megabyte Simm: Horizontally-Mounted Chips - Sun Microsystems SPARCstation 2 Service Manual

6. Place an anti-static mat shiny side up, next to the system unit.
The mat comes with your SIMMs.
7. Make sure the wrist strap is securely attached to your wrist and the metal
casing of the power supply.
8. See Chapter 3 for instructions on how to attach a wrist strap.
9. Open the anti-static container and take out the SIMMs.
10. Place the SIMMs on the anti-static mat. Figure 4-8 shows typical SIMM.
Figure 4-8 4 Megabyte SIMM: Horizontally-mounted Chips
11. Holding a SIMM at its edges, insert it into the plastic guides by pushing
straight down.
The SIMM should rest loosely in the slot. The SIMMs are keyed to allow
installation in only one direction. When a SIMM is properly installed, its
component side must face the back panel.
FRU Replacement
4
53