Sun Microsystems SPARCstation 2 Service Manual page 73

Caution – When replacing the SBus board, do not press down on the SBus
!
board retainer. The SBus board retainer is not a handle. Pressing down on it
may break the retainer.
Holes that receive
mounting plate hooks
SBus slot 1
SBus slot 2
SBus slot 3
2. Push the SBus board against the back panel.
Align the plug with the socket of the SBus slot and gently press the plug
into the socket by pressing with your fingers on the corners of the SBus
board.
Caution – Using excessive force may bend or damage the pins.
!
3. Replace the top cover of the system unit.
To do this, see "Replacing the System Unit's Cover" near the end of this
chapter.
4. Replace the external cables to the SBus boards.
FRU Replacement
Press on corners of
board. Do not press on
plastic SBus board retainer
SBus board retainer
4
57