SOLTEK 75FRN2 Series Manual page 40

Series 75FRN2: 75FRN2, 75FRN2-L, 75FRN2-R, 75FRN2-RL
Step 4. Type awdflash *.bin /sn/py/cc and then press <Enter> to run
BIOS upgrade program. (*.bin depends on your mainboard model and
version code. Instead of typing "*", you should type specific file name
for your specific mainboard).
Step 5. Please press <F1> or <F10> to exit or reset your system.
Warning ! If the message " Write Fail " appears while Award "FLASH
MEMORY WRITER" is verifying Flash memory, just repeat the process.
Please DO NOT reset or turn off the system. If the award memory flash
utility is not able to update the BIOS successfully, your system may not
be able to boot up.
Step 6. You will need a message "CMOS checksum error-Default
loaded" during booting the system. Press <Del> to run CMOS setup
utility, then reload "LOAD SETUP DEFAULTS" or "Load Optimized
Defaults" and save this change.
The parameters of AWDFLASH.EXE
/sn: No original BIOS backup
/py: Program flash memory
/cc: Clear CMOS data (and update data automatically) after pro-
gramming
NOTE: Users can type AWDFLASH /? to get further details about
the parameters. Incorrect usage of the parameter will dam-
age the BIOS information, so we strongly recommend users
to leave parameters alone unless you fully understand their
function.
54