SOLTEK 75FRN2 Series Manual page 56

Series 75FRN2: 75FRN2, 75FRN2-L, 75FRN2-R, 75FRN2-RL
AC97 Audio Select "Enabled" to use the on-chip audio capability
of your system. Most of the field do not appear when
this field is "Disabled", for user who wants to use
add-on sound card, this item must be disabled.
MAC LAN(nVIDIA) This option allows you to enable/disable the Onboard
LAN Controller.
The choices: Auto(default); Disabled
IDE HDD Block Mode Block mode is also called block transfer, multiple
commands, or multiple sector read/write. If your IDE
hard drive supports block mode (most new drives
do), select Enabled for automatic detection of the
optimal number of block read/write per sector the
drive can support.
Choices: Enabled(default); Disabled
POWER ON Function Allows you to set the way to boot up the system.
Choices: Password; Hot KEY; Mouse Left; Mouse
Right; Any KEY; BUTTON ONLY(default); Keyboard
98
KB Power On Pass- If Keyboard Power-on function is set at "Password",
word this item shows up to allow you to type a password
for the power-On function.
Choices: N/A; Password
Hot Key Power ON Allows you to set the hot key to boot up the system.
Onboard FDC Select Enabled if your system has a floppy drive
Controller controller (FDC) installing in the system board and
you want to use it. If you install add-in FDC or the
system has no floppy drive, select Disabled in this
field.
The choices: Enabled; Disabled
70