Removing The Rackswitch From A System X Or Power Rack - IBM G8316 Installation Manual

Removing the RackSwitch from a System x or Power rack

To remove the RackSwitch from a System x or Power rack, complete the following
steps:
1. Disconnect all cables.
2. Loosen and remove M3 screws that secure the rear brackets to the front
3. Loosen and remove M6 washers, screws, and clip nuts that attach the filler
4. Slide the rear mounting brackets out of the slots available on the front mounting
34
IBM System Networking RackSwitch G8316, Type 8036 and Type 1611-16E: Installation Guide
brackets.
10 11
plate to the rear mounting brackets.
8
brackets.
9
3
4
2
6