Switch Leds - IBM G8316 Installation Manual

The following items are also included with the console cable.
v Category 5 patch cable
v RJ-45 to female DB9 adapter
To connect a computer or terminal to the switch, first connect the console cable to
the mini-USB port on the front panel. Connect one end of the patch cable to the
RJ-45 port on the console cable, and the other end of the patch cable to the
RJ-45-to-DB9 adapter (see the following illustration).
Switch
Figure 4. Console cable connections
USB port
The USB port enables you to connect a USB drive to the switch. You can copy files
from the switch to the USB drive, or from the USB drive to the switch. You can also
start the switch using files on the USB drive.
For more information about using the USB drive, see the Release Notes
switch.

Switch LEDs

Two LED stacks provide system status and port link status. The following illustration
shows the system LEDs.
Reset Button
RS-232 Port
The system LEDs are described in the following table.
The following table describes the system LEDs.
8
IBM System Networking RackSwitch G8316, Type 8036 and Type 1611-16E: Installation Guide
To
Switch
Console Cable
Mgmt
!
Table 5. System LEDs
Symbol
!
S
Category 5
Patch Cable
RJ-45 Port
USB Port
S
System Status LEDs
Description
Service indicator
Power supplies and power input status
Fans status
Stacking indicator
To PC
Terminal
RJ-45 Adapter
®
for the