Table of Contents
Advertisement
PRESYS
⏐ Instruments
The range of the adjustable parameters shown on figure 11 is given below.
Mnemonic
LIM LOW
LIM HIGH
ENG LOW
ENG HIGH
OFFSET
FILTER
(*) EU - Engineering Unit
The scale is configured (SCALE option) using, two points P1 (LIM LOW,
ENG LOW) and P2 (LIM HIGH, ENG HIGH), according to figure 12. LIM LOW represents
the value of the electrical signal, in %, associated to the display indication ENG LOW,
and LIM HIGH corresponds to the value of the electrical signal, in %, associated to the
display indication ENG HIGH.
Parameter
percentage of the input
full scale (20mA, 5V or
10V), associated to
ENG LOW
percentage of the input
full scale (20mA, 5V or
10V), associated to
ENG HIGH
display indication
associated to LIM LOW
display indication
associated to LIM HIGH
constant added to
display indication
time constant of first
order digital filter
Fig. 12 - Linear Input Configuration
DCY-2058 and DCY-2059
Factory
Adjustable
0.0 to 100.0
0.0 to 100.0
-999 to 9999
-999 to 9999
-999 to 9999
0.0 to 25.0
Unit
Value
0.0
%
100.0
%
0.0
EU*
100.0
EU
0
EU
0.0
second
Operation
Page 21
Advertisement
Table of Contents
