Working With Special Accessories - Mafell ZSX Ec 260 HM Operating/Safety Instructions Manual

5.6 Working with special accessories

Various special accessories are available for the machine. An overview can be found in chapter 8 Optional
accessories.
Some utilization methods are explained below.
5.6.1 Using the extraction adapter
The extraction adapter (special accessory) is mounted without tools.
Use the following procedure to use the
extraction adapter:
1. Unscrew the knurled screw (26) of the
extraction adapter completely until it hits the
stop.
2. When you fit the extraction adapter, first
position it on the existing screw (27) of the
ejector flap.
Ensure that the ejection flap on the
➢
machine points in the direction of the
extraction adapter.
3. Place the extraction adapter completely onto
the ejection opening.
4. Tighten the knurled screw (26).
You can now use the extraction adapter.
✓
The extraction adapter can only be used in connection with the extraction hose Ø 49 mm (order no. 093682)
[1.93 in] and the suction unit S35 HEPA (order no. 91C423).
28
Fig. 37: Mounting the extraction adapter
ZSX Ec
02/2022