Safety Devices - Mafell ZSX Ec 260 HM Operating/Safety Instructions Manual

ZSX Ec
- Note that the saw chain and the guide rails can be hot shortly after processing.
- Note that cuttings falling down when sawing large workpieces can cause injuries.
- Be particularly careful when sawing the last workpiece to be sawed. The machine's supporting surface will
be reduced. If necessary, clamp an additional workpiece to ensure the machine has a stable support.

3.5 Safety devices

The machine is equipped with the following safety devices:
Safety device
Large base plate and parallel guide fence
Bottom deflection with guard sheet
Riving knife/splitter
Handles
Switching device and brake
Hose connector
If the safety devices are damaged or not functioning properly, follow the instructions in the chapter
Troubleshooting. For other malfunctions, please contact your dealer or MAFELL Customer Service directly.
02/2022
RETAIN THESE INSTRUCTIONS!
Danger
Risk of injury from missing safety devices
These devices are necessary for the safe operation of the machine. They must
not be removed or rendered ineffective.
Check the proper functioning of the safety devices before you start
➢
operating the machine.
Never use the machine with missing or ineffective safety devices.
➢
Type of check
Visual check for damage and deformation
Visual check for damage
Visual check for damage and deformation
Visual check for damage
Functional check (braking time must not be longer
than 7 seconds)
Visual check for damage and obstruction
11