Mafell ZSX Ec 260 HM Operating/Safety Instructions Manual page 15

ZSX Ec
13. Mount a new / freshly sharpened saw chain on
the guide bar.
14. Insert the guide bar together with the saw
chain into the machine guide.
➢ The chain tensioning bolt (18) must
engage in the bore provided for it in the
guide bar.
The cutting edges of the chain teeth
➢
must point in the direction of the marking
(19) for the running direction.
15. Using the combination screwdriver (B), rotate
the gearbox shaft (20) such that the mounted
saw chain smoothly engages into the driver
toothing of the gearbox shaft.
16. Mount the intermediate cover (13).
17. Using the combination screwdriver (B), turn
the hexagon socket screw (12) clockwise to
slightly lock it.
18. Insert the oil tank (14).
19. Turn the tensioning screw (17) clockwise until
the correct chain tension is reached.
For this, see the information in chapter
➢
4.4 Chain tension.
20. Using the combination screwdriver (B), turn
the hexagon socket screw (12) clockwise to
tighten it.
02/2022
Fig. 8: Mounting a guide bar with new / freshly sharpened
saw chain
Fig. 9: Inserting intermediate cover and oil tank
Fig. 10: Tightening the chain tension
15