Mafell ZSX Ec 260 HM Operating/Safety Instructions Manual page 14

6. Using the combination screwdriver (B), turn
the hexagon socket screw (12)
counterclockwise to loosen it.
7. Remove the intermediate cover (13) and the
oil tank (14).
8. Using the combination screwdriver (B), loosen
the fastening bolt (15) at the bottom of the
guide bar counterclockwise to loosen it.
9. Open the guard sheet (16).
10. Using the combination screwdriver (B), turn
the clamping screw (17) counterclockwise to
loosen it.
Chain tension released.
➢
11. Remove the guide bar together with the saw
chain.
12. Remove the old saw chain.
14
Fig. 5: Removing intermediate cover and oil tank
Fig. 6: Opening the guard sheet at the guide bar
Fig. 7: Release the chain tension and remove the guide
bar together with the saw chain
ZSX Ec
02/2022