Infopia EASYGLUCO Auto-coding Operation Manual page 12

Collecting a Drop of Blood
Disposing of your lancet
1. Push the needle into the protective
cover.
Recommended Available Lancing Device
infopia, infolet sterile Lancet is used with a Lanzo Lancing device.
Note : Please, contact your supplier to make sure you are using proper Lancing
device.
STORAGE
• The lancets must be stored at room temperature (2~30 ) protected from sunlight or
moisture
• High temperature, high humidity should be avoided, should be kept well-ventilated
place.
• It expires 5 years after sterilized packing using gamma irradiation.
22
2. Pull the lancet out and discard
accordingly.
Step 1
Firmly insert the EASYGLUCO Auto-coding
Meter test port. Insert down firmly in direction of arrow on test strip
coding
TM
(arrow up). Please do not insert the test strip upside down. When you insert the
test strip into the meter, the power automatically turns on with the code and
temperature. After 3 seconds, the code number and testing temperature will
disappear. When the strip sign blinks, apply your blood to the test port of strip.
Note : Inserting the test strip in the wrong direction will turn the meter on, but you will be
unable to test.
Caution
1. If the code is not displayed after 3 seconds, pull the test strip out of the port, and
re-start the procedure from the beginning.
2. If the code on the LCD display window and on the test vial does not match, try
another new strip. If the mismatch persists, please contact your local
representative for help.
3. If the meter does not power on, pull the test strip out of the port, and re-insert the
test strip.
4. Avoid testing under direct sunlight, for a more accurate test result.
5. If you apply your blood sample too early, ERROR5 message will appear on LCD
( refer to p33).
• For a more accurate test result avoid testing under direct sunlight.
Test Procedure
test strip into EASYGLUCO Auto-
TM
23