Dsd And Dxd; Filters - M2TECH EVO PHONODAC TWO User Manual

Hide thumbs Also See for EVO PHONODAC TWO:

Table of Contents

M2Tech

EVO PHONODAC TWO

DXD-DSD A-TO-D AND D-TO-A CONVERTER – PHONO PREAMP

REVISION P

A – JULY 2016

www.m2tech.biz

7.7. DSD and DXD

The PHONODAC TWO DAC section handles both DXD and DSD on its USB port. On the

other hand, analog signals may only be converted in PCM (up to 384kHz/32bit), while the

auxiliary S/PDIF inputs only accepts PCM up to 192kHz/24bits, conforming to the

standard.

The PHONODAC TWO DAC is provided with a wealth of filters, to optimize the coupling with

every analog source.

A high-pass (anti-rumble) filter allows for reducing the low-frequency rumble produced by

poorly set turntables or warped records.

A low-pass (anti-hiss) filter limits the high frequency noise present in old 78rpm records

and in certain FM stereo broadcasts, as well as in certain recordings on cassette tape.

Figure 4

Table of Contents

Do you have a question about the EVO PHONODAC TWO and is the answer not in the manual?