Verify installation
A6
Default state
During setup
* Switch between
channels
* Confirm channel
selection
LED states
Solid white
Blinking white
(LED 1)
Blinking red
Solid red
Channel LEDs
1
2
3
4
Select channel
Apply Boost
* Note:
1. Use the top button (Select channel)
to switch between di erent
channels.
2. Use the bottom button (Apply
Boost) to confirm channel selection.
3. Long press any button to initiate
setup. It suggests that the receiver
is ready to be paired with mobile
app or another PTD.
21