Table 4. Pins for third-party racks (continued)
Rail Pins from kit
4. Install the right rail to the rack rear channel. You can adjust the rails later, if necessary. The following figure shows the
installation details.
Refer to
Installing the right rail to the front channel
Part Number and Description
(Quantity: 4 per kit)
036-028-016
3.8MM Alignment Pin
(Quantity: 8 per kit)
036-028-017
4.8MM Alignment Pin
(Quantity: 8 per kit)
on page 37 while performing the tasks in this step.
Suggested Use
Used in racks that have M5, #10, or
#12 threaded holes.
Used in racks that have M6 threaded
holes.
Install the Disk Shelves in the Rack
35