Keysight U8903A Quick Start Manual page 5

– DO NOT substitute parts or modify equipment.
WARNING
– This equipment is under CAT 1 measurement category, do not connect
– Do not measure more than the rated voltage (as marked on the
– Use the device with the cables provided.
CAUTION
– Repair or service that is not covered in this manual should only be
– Observe all markings on the device before establishing any connection.
– Always use dry cloth to clean the device. Do not use ethyl alcohol or any
– Do not permit any blockage of the ventilation holes of the device.
Keysight U8903A Quick Start Guide
To avoid the occurrence of additional hazards, do not install substitute
parts or perform any unauthorized modification to the product. Return
the product to Keysight for service or repair to ensure that the safety
features are maintained.
the cable to MAIN.
CAT 1
Maximum Working Voltage: 200 Vp for
altitude up to 3000 m
Maximum Transient Voltage: 1210 V
equipment).
performed by qualified personnels.
other volatile liquid to clean the device.
5