Using This Fixture With The Wicicle® Wireless Dmx System - Blizzard Lighting SnowBlind User Manual

USING THIS FIXTURE WITH THE wiCICLE® WIRELESS
DMX SYSTEM
In addition to the unbridled thrill you already
received the first time you plugged in your fix-
ture, you'll be delighted to know that This fix-
ture also works seamlessly with our wiCICLE
Wireless DMX system, without additional power.
• ONLY fixtures bearing this logo are certified for use with the wiCICLE
without external power.
• Unauthorized modification and/or using the wiCICLE
approved fixtures may cause damage to the wiCICLE
UNDER NO CIRCUMSTANCES IS BLIZZARD LIGHTING RESPON-
SIBLE FOR ANY DAMAGE FROM SUCH OPERATION.
• Fixtures bearing the above logo MUST only use cable and connectors
which separate chassis/case ground from cable shielding. Cabling with
the shield connected to the connector's case/chassis may cause malfunc-
tion and damage to the wiCICLE
• wiCICLE
therefore cannot be powered directly from the fixture. You will
need to utilize the supplied AC/DC adaptor to drive wiCICLE
transmitters in your system.
WE HAD THIS SPACE, SO WE FIGURED WE'D DRAW
YOU A PICTURE:
Snowblind User Manual Rev. C
transmitters have additional power requirements and
®
Antenna Housing & 1/2-wave
Antenna
Antenna ferrule & articulation
joint
Stainless Steel Housing
Recessed Selector Button
Status LED
3-Pin XLR Connector
(Male on transmitter, Female
on receiver model)
®
or fixture.
®
Page 8
with un-
®
or fixture.
®
®
© 2021 Blizzard Lighting, LLC
®