Polaris RIDE COMMAND User Manual page 43

ENGINE OVERHEAT INDICATORS
See your vehicle owner's manual for more information.
A flashing indicator indicates continued operation could result in serious engine
damage. The engine management system will automatically reduce engine
power and set a fault. Stop the engine immediately. Allow the engine to cool
down.
If engine overheating seems to be caused by something other than poor
GPS MAPPING
The compass is controlled by the GPS systems. Calibration is not required.
Use the compass and full-featured GPS when the GPS receiver is installed
(includes the display of latitude, longitude and elevation). Mark and save
waypoints and rides.
cooling conditions, see your dealer for service.
NOTICE
NOTICE
NOTE
OPERATION
41