Polaris RIDE COMMAND User Manual page 37

For ranger, rzr, and general off-road vehicles

Hide thumbs Also See for RIDE COMMAND:

PLOW MODE (IF EQUIPPED)

Plow Mode is a feature available for use with RANGER XP 1000 vehicles that

have a factory installed Ride Command System with a winch and auto stop

winch fairlead as part of the factory wiring harness.

It is not recommended to use plow mode with winch in rapid recovery mode.

Plow Mode is an

automated plow control

system based on vehicle

gear position. To enable

Plow Mode, do the

following:

1. On the display, go to

"Settings," "Vehicle,"

and then select "Plow

Installed."

2. From the Plow installed

screen, move the

toggle switch from "No"

to "Yes."

The procedure above is only required one time. The system will remember

your settings for future use. If you want to disable seeing the plow mode

screen as part of the gauges screen option, you can set the toggle back to "No"

FEATURES AND CONTROLS

NOTE

at a later date.

Table of Contents

Show Quick Links

Need help?

Do you have a question about the RIDE COMMAND and is the answer not in the manual?