Polaris RIDE COMMAND User Manual page 34

FEATURES AND CONTROLS
• Enable your Bluetooth® tethering in your phone's settings. Tap instruction for
more information of how to enable tethering on an iPhone or Android phone.
• Connect your phone via Bluetooth®. If you phone is currently connected you
MUST disconnect and reconnect it.
• Press the login button to login to your Ride Command account. If you do not
have a ride command account, sign up at ridecommand.polaris.com
Once you've completed all three steps above, your information will be stored
(unless cleared manually) and you will not need to login again into your Ride
4. Press the back button to go back to the group ride screen and join your
Group Ride.
In order for vehicles with a V2V antenna and vehicles using mobile phone
based group ride to join the same group, at least one member of the group
must be connected to both the V2V antenna and the mobile phone based
VEHICLE TO VEHICLE (V2V) ANTENNA
If your vehicle is equipped with a V2V antenna, use the following procedure to
setup Group Ride:
1. From the map menu,
tap the Group Ride
button.
2. Tap Setup V2V Group
Ride button on the
display screen.
3. Tap the Antenna
Installed toggle switch
to the Yes position.
32
Command account for future group rides.
group ride.
NOTE
NOTE