Making Changes To The System Configuration; Configuration Menu - ADC PAIRGAIN HiGain HDSL2 Manual

Provisioning

Making Changes to the System Configuration

The Config menu (Figure
•
Standard options
•
PairGain options
•
Date and time (see
•
Master clear (see
•
Reset to factory default configuration
Monitor Performance
ID: xxxx--xxxx--xxxx--xxxx
Making Changes to Standard and PairGain Options
Figure 8 and Figure 9 on page 19
those that are supported by HiGain HDSL2 units when connected to units from other vendors. PairGain options
are an extended set of options that are only available when using HiGain units exclusively. For a description of
each option and a list of possible option settings, refer to
changes to these options:
1 Press C to select the Config menu.
2 Use the and
­ ¯
3 Use the arrow keys to select an option.
4 Press the SPACEBAR
5 Press ENTER to activate your choice.
18
7) allows you to make the following types of system configuration changes:
(Figure 8 on page 19)
(Figure 9 on page 19)
"Setting Date and Time" on page
"Clearing the History, Alarm, and Event Log Screens" on page
(Figure 10 on page
Event Log Config
+----------------------+
| Standard Options ->
| PairGain Options ->
| Date and Time
| Master Clear
| Set Factory Defaults |
+----------------------+
04/15/00 12:30:01
Figure 7. Configuration Menu
show the Standard and PairGain configuration options. Standard options are
arrow keys to select Standard Options or PairGain Options, and press
to cycle through the available settings for that option.
16)
29)
Inventory Rlogon
|
|
-> |
|
H2TU-C
Table 5 on page 20
April 21, 2000
152-231-115-03, Revision 03
30)
Help
System: OK___
and Table 6 on page 21. To make
ENTER
H2TU-C-231 List 1E
.