Making Changes To The System Configuration; Configuration Menu - ADC HiGain H2TU-C-202 User Manual

152-202-115-04, Revision 04

Making Changes to the System Configuration

The Config menu (Figure
•
Standard options
•
ADC options (Figure 10 on page
•
Date and time (see
•
Master clear (see
•
Reset to factory default configuration
Monitor Performance
ID: xxxx--xxxx--xxxx--xxxx
Making Changes to Standard and PairGain Options
Figure 9 and Figure 10 on page 16
those that are supported by HiGain HDSL2 units when connected to units from other vendors. PairGain options
are an extended set of options that are only available when using HiGain units exclusively. For a description of
each option and a list of possible option settings, refer to
changes to these options:
1 Press C to select the Config menu.
2 Use the and
↑ ↓
3 Use the arrow keys to select an option.
4 Press the SPACEBAR
5 Press ENTER to activate your choice.
H2TU-C-202 List 1E
8) allows you to make the following types of system configuration changes:
(Figure 9 on page 16)
16)
"Setting Date and Time" on page
"Clearing the History, Alarm, and Event Log Screens" on page
(Figure 11 on page
Event Log Config
+----------------------+
| Standard Options ->
| PairGain Options ->
| Date and Time
| Master Clear
| Set Factory Defaults |
+----------------------+
04/21/00 12:30:01
Figure 8. Configuration Menu
show the Standard and PairGain configuration options. Standard options are
arrow keys to select Standard Options or PairGain Options, then press
to cycle through the available settings for that option.
13)
25)
Inventory Rlogon
|
|
-> |
|
H2TU-C
Table 5 on page 17
April 21, 2000
Provisioning
26)
Help
System: OK__
and Table 6 on page 18. To make
ENTER .
15