Honeywell Notifier AFP-100 Wiring Manual page 50

Intelligent Detectors, Intelligent Detector Bases, and Wireless Gateway
Figure 10.2 shows typical wiring of the B710HD detector base (for use with a HARSH™ detector) connected to an SLC. An optional
RA100Z Remote LED Annunciator is shown connected to the base.
50
SLC
To compatible
UL Listed
Power Supply
Figure 10.2 Wiring of the B710HD Detector Base
NOTE: Use a spade lug to wire the Remote LED Annunciator (–) to Terminal 2 (–).
To next device
on SLC
Power to next
device
RA100Z
Remote LED
Annunciator
(Optional)
Notifier SLC Wiring Manual — P/N 51253:U5 12/20/2017
Wiring a Detector Base
For connection of
cable shield