Maintenance Menu; Maintenance Parameters - Elsteam MISTRAL Use And Maintenance Manual

7.2.5 Maintenance menu

Inthemaintenancemenu,youcanview:
• The value read by the connected sensor;
• The value read by the on-board NTC sensor;
• The statuses of the digital inputs ID1 and ID2;
• The fan speed;
• Theoperatinghoursofthemist-maker;
• The operating hours of the fan;
• The state of the outputs:
• Mist-maker;
• Fan;
• Inlet solenoid valve;
• Outlet solenoid valve;
• Digital output UD1.
• Any alerts in progress.

7.2.6 Maintenance parameters

The following is a table with the labels shown on the display and their description:
Top row Bottom row Description
Pb1 sensor value Pb1
Pb2 sensor value Pb2
Status ID1
Status ID2
Value F0 FAn
Value r6 PrM
Mist-makerhours MH
Mist-makerhours MHH
Mist-makerhours MHL
0 rMH
Fanhours
Fanhours FHH
Fanhours FH L
0 RFH
Mist-makeroutput
OM
status
Fanoutputstatus
924EHUCE4.00 - Mistral Humidifier
IfsensorPb1isconnected,thevaluereadbythesensorisdisplayed.
IfsensorPb2isconnected,thevaluereadbythesensorisdisplayed.
Ifconnected,thestatusofthedigitalinputID1 is displayed.
di1 CLo = ID1 closed;
OPn = ID1 open.
Ifconnected,thestatusofthedigitalinputID2 is displayed.
di2 CLo = ID2 closed;
OPn = ID2 open.
The F0 (fan speed) parameter configuration value is displayed.
The r6 (maximum steam production) parameter configuration value is displayed.
Theoperatinghoursofthemist-makeraredisplayedif≤9999h
Ifthemist-makeroperatinghoursare>9999,theoperatinghoursdataisdividedaccording
to the following logic: (MHHx1000)+MHL.
For example: MHH = 1; MHL = 2956
Ifthemist-makeroperatinghoursare>9999,theoperatinghoursdataisdividedaccording
to the following logic: (MHHx1000)+MHL.
For example: MHH = 1; MHL = 2956
Resetsthemist-makeroperatinghours.
Tap the
to confirm the reset. On the top row
"----"blinksfor3secondsafterwhich0 is displayed indicating that the reset has been accomplished.
Theoperatinghoursofthefanaredisplayedif≤9999h
FH
Ifthefanoperatinghoursare>9999,theoperatinghoursdataisdividedaccordingtothe
following logic: (MHHx1000)+MHL.
For example: MHH = 1; MHL = 5894
Ifthefanoperatinghoursare>9999,theoperatinghoursdataisdividedaccordingtothe
following logic: (MHHx1000)+MHL.
For example: MHH = 1; MHL = 5894
Resets the fan operating hours.
Tap the
to confirm the reset. On the top row
"----"blinksfor3secondsafterwhich0 is displayed indicating that the reset has been accomplished.
Themist-makeroutputstatusisdisplayed.
OFF=Mist-makeroutputOFF;
ON=Mist-makeroutputON.
The fan output status is displayed.
oF OFF=FanoutputOFF;
ON=FanoutputON.
(1x1000)+2956=12956h
(1x1000)+2956=12956h
key,enterthepasswordvalue149usingthe
(1x1000)+5894=15894h
(1x1000)+5894=15894h
key,enterthepasswordvalue149usingthe
| 37 |
or keys,tap
or keys,tap
06/2022