Main View; Setting And Changing The Setpoint - Elsteam MISTRAL Use And Maintenance Manual

7.2.3 Main view

Depending on the chosen operating mode (CFG) the display has a different main view. The main views according to the
configured operating mode are shown below:
ON/OFF mode operation
Fig. 26. ON/OFF operation - ID1 and ID2 open
Proportional mode operation
Fig. 28. Proportional operation - ID1 and ID2 open
With ID2closed,thetoprowofthedisplayshowsthereadvalueofthe0...10Vinputsignal,whilethebottomrowisoff.
Operation with sensor
Fig. 30. Proportional operation - ID1 and ID2 open
With ID2closed,thetoprowofthedisplayshowsthevalueoftheconnectedsensor,whilethebottomrowshowsthesetpoint
value (SP).
Inaddition,dependingonthetypeofsensorconnectedandthereforetheoperatingmodewiththechosensensor,a
correspondingiconwillcomeon,asdescribedinthesubsection"7.2.1 ICONS" ON PAGE 35.

7.2.4 Setting and changing the setpoint

If CFG=0, 1, 5, 6, 10
Setpointnotconfigurable.
If CFG= 2, 3, 4, 7, 8, 9
Inthemainview,tochangethesetpoint,tapandreleasethe
blinktoindicatethatyoucanmakethechangebyscrollingwiththe
the desired value.
924EHUCE4.00 - Mistral Humidifier
Fig. 27. ON/OFF operation - ID1 and ID2 closed
Fig. 29. Proportional operation - ID1 and ID2 closed
Fig. 31. Proportional operation - ID1 and ID2 closed
button. The value on the bottom row of the display will
or buttons. Tap the
| 36 |
button to confirm
06/2022