Info Menu - ETC SolaPix 19 XT User Manual

High end systems
Table of Contents

Advertisement

Separate Console Control and Video Server Control
The system contains a video control source in addition to a DMX console.
Example:
For each fixture:
Configure the Base module with DMX source and a unique address.
Set the Flex module to Compound mode.
Set the Pixel module to Independent mode, set the sACN or Art-Net source, and
assign a unique DMX address and universe.
The result: All fixtures have control for the 38 channels of Base module functions
and animations via DMX, and 76 channels of control for the Pixel module via
Ethernet from a video server.

Info Menu

Set the Time Information
Navigate: Main Menu → Info → Time Info
Parameter
Current Time
Ttl Life Hrs
Last Run Hrs
LED Hours
Timer PIN
Clr Last Run
LED Time PIN
Clear LED Time
View Fixture Errors
Navigate: Main Menu → Info → Error Info
Displays any current fixture errors. See
errors.
Configure the Fixture
Value
Description
XXXX (Hours)
Running time of the fixture from the last time that the
fixture was powered on, shown in hours (h). The
counter resets after the fixture is turned off.
XXXX (Hours)
Total running time of the device, shown in hours (h).
XXXX (Hours)
Running time of the fixture from the last time that the
run time value was reset, shown in hours (h).
XXXX (Hours)
Total running time of the fixture LEDs, shown in
hours (h).
Timer PIN XXX
You must enter the Timer PIN in order to access the
Clr Last Run menu item. The default Timer PIN is 038.
ON
This password-protected menu item resets the Last
Run Hrs value. You must enter the Timer PIN to access
OFF
this menu item.
Select ON to clear the value for the Last Run Hrs
parameter for the fixture.
LED Time PIN XXX You must enter the LED Time PIN in order to access
the Clear LED Time menu item. The default LED Time
PIN is 038.
ON
This password-protected menu item resets the LED
Hours value. You must enter the LED Time PIN to
OFF
access this menu item.
Select ON to clear the value for the LED Hours
parameter.
Error Codes on page 28
for information about the
21

Advertisement

Table of Contents
loading

Table of Contents