Table of Contents
Advertisement
Removing the pet mask
Remove the pet mask if you do not require pet immunity.
1.
Open the device cover. See Figure 3.
2.
Remove the tabs at the side of the pet mask from both holes and gently lift the pet mask out
from the bottom holes. See the following figure.
Figure 6: Removing the Pet Mask
3.
Close the device cover. See Figure 5.
MP-802 PG+ Wireless PIR Motion Detector Installation Guide
D-308439 MP-802 PG+ Rev.0
9
Advertisement
Table of Contents
Need help?
Do you have a question about the MP-802 PG+ and is the answer not in the manual?
Questions and answers