Johnson Controls MP-802 PG+ Installation Manual page 19

About MP-802 PG+
The MP-802 PG+ is a microprocessor-controlled wireless digital PIR detector, with optional pet
immunity.
The device has the following features:
•
Fresnel and cylindrical lenses with uniform detection sensitivity throughout its operating
range, up to 12 meters (39 ft).
• Target Specific Imaging™ (TSI) technology is used for distinction between humans and pets
weighing up to 38 kg (85lb).
• The advanced True Motion Recognition™ algorithm (patented) distinguishes between the
true motion of an intruder and any other disturbances which may cause false alarms.
•
No vertical adjustment is needed.
•
Motion event counter determines whether one (high sensitivity) or two (low sensitivity)
consecutive motion events trigger an alarm.
•
Very low current consumption.
•
Microprocessor-controlled temperature compensation.
•
Front and back tamper protection.
•
Temperature sensing and reporting.
•
Remote firmware upgrade.
MP-802 PG+ Wireless PIR Motion Detector Installation Guide
D-308439 MP-802 PG+ Rev.0
19