Rear Panel Description - URC Total Control MRX-15 Owner's Manual

Total Control

Rear Panel Description

Below are the rear panel ports:
1. Power: Attach the included power supply here.
2. LAN: RJ45 10/100/1000 Ethernet port.
3. IR Outputs: Eight (8) standard 3.5mm IR emitter ports with individual
output level adjustment screws.
4. Relays: Two (2) programmable relays at NO, NC, or COM.
5. 12V OUT: Two (2) programmable outputs. Each may be programmed to
turn on, off, or momentarily toggle.
6. Sensors: Four (4) sensor ports that allow the programming of state
dependent and triggered macros. Compatible with all URC sensors.
7. RS232: Four (4) RS-232 ports. Supports TX, RX, and GND connections for
wired two-way communication.
3
MRX-15
Owner's Manual