Connecting Ir Emitters - URC Total Control MRX-15 Owner's Manual

Total Control

Connecting IR Emitters

IR emitters are used to communicate to AV devices such as cable boxes, televisions,
blu-ray players and more.
1. Plug IR Emitters (eight (8) supplied in the box) into any of the eight (8) IR
outputs available on the rear of the MRX-15.
All IR outputs include an adjustable sensitivity dial. Turn this dial to the right
to increase the gain and to the left to decrease it.
2. Remove the adhesive covering from the emitter and place it over the IR
receiver of the 3rd party device (cable box, television, etc.).
1
5
MRX-15
Owner's Manual
2