Table of Contents
Advertisement
Available languages
Available languages
Remote Control Pairing
ㆍPlace the remote control within 10cm of the device.
ㆍPress the Home key
and Menu key
simultaneously until the indicator light begins flashing and a "Di" is heard.
ㆍThis means that the remote control enters the pairing mode.
ㆍWhen a "DiDi" is heard,the connection is successful.
10 cm
Indicator light
Hold to press for pairing *
* If pairing is unsuccessful,repeat the above steps after the
remote control indicator light stop flashing.
08
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the Mars Pro and is the answer not in the manual?
Questions and answers
всё работает,а лазер лампа проектора не светится,что делать,какая причина..
If the laser lamp of the Dangbei Mars Pro projector is not lighting up, follow these steps:
1. Check Power Connection – Ensure the projector is properly plugged in and receiving power.
2. Observe LED Indicator – When pressing the power button, if the LED flashes and the fan turns on but no image appears, this indicates a potential issue.
3. Restart the Projector – Unplug the projector, wait a few moments, then plug it back in and try turning it on again.
4. Inspect Ventilation – Ensure that the air intake and exhaust vents are not blocked, as overheating could prevent the laser from activating.
5. Factory Reset – If possible, reset the projector to its default settings.
6. Contact Support – If the issue persists, the laser module may have failed, requiring professional repair or replacement.
If the projector repeatedly powers off after attempting to start, it may indicate hardware failure. Contact Dangbei customer support for further assistance.
This answer is automatically generated