Table of Contents
Advertisement
Available languages
Available languages
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. (for companies headquartered in the U.S./Japan/
Taiwan) or under license from DTS Licensing Limited (for all other companies). DTS, DTS-HD Master Audio,DTS-HD, and the DTS-HD logo
are registered trademarks or trademarks of DTS, Inc. in the United States and other countries.© 2020 DTS, Inc. ALL RIGHTS RESERVED.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories
Licensing Corporation.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,Inc. and any use of such marks by HANGZHOU
DANGBEI NETWORK TECHNOLOGY CO.,LTD is under license. Other trademarks and trade names are those of their respective owners.
HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc.
Une lumière bleue excessive des produits d'affichage peut causer fatigue oculaire, insomnie et autres effets
indésirables.Ce produit est un bleu bas certifié TÜV Rheinland produits, en réduisant la composante de
lumière bleue la technologie, peut réduire la fatigue oculaire et d'autres effets indésirables dans une certaine
mesure.
Afin de protéger votre vue, il est toujours recommandé d'éviter de regarder pendant longtemps.Si vous ressentez une fatigue oculaire,
elle peut être soulagée en regardant au loin ou en faisant de la santé oculaire des exercices.
43
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the Mars Pro and is the answer not in the manual?
Questions and answers
всё работает,а лазер лампа проектора не светится,что делать,какая причина..
If the laser lamp of the Dangbei Mars Pro projector is not lighting up, follow these steps:
1. Check Power Connection – Ensure the projector is properly plugged in and receiving power.
2. Observe LED Indicator – When pressing the power button, if the LED flashes and the fan turns on but no image appears, this indicates a potential issue.
3. Restart the Projector – Unplug the projector, wait a few moments, then plug it back in and try turning it on again.
4. Inspect Ventilation – Ensure that the air intake and exhaust vents are not blocked, as overheating could prevent the laser from activating.
5. Factory Reset – If possible, reset the projector to its default settings.
6. Contact Support – If the issue persists, the laser module may have failed, requiring professional repair or replacement.
If the projector repeatedly powers off after attempting to start, it may indicate hardware failure. Contact Dangbei customer support for further assistance.
This answer is automatically generated