Network Settings; Focus Settings - Dangbei Mars Pro User Manual

Hide thumbs Also See for Mars Pro:
Table of Contents

Advertisement

Available languages

Available languages

Network Settings

Connect the Wi-Fi Network
ㆍInto [Settings] - [Network].
ㆍSelect the wireless network,and enter the password.
Connect the Wired Network
ㆍPlug the network cable into the device LAN port(Please ensure
the network with the internet).
* The device supports both wired and wireless networks,
when both are connected,the system will optimally use
the wired network.

Focus Settings

Method 1:Hold to press the remote control side key,will automatic
focus adjustment.
Method 2:Into [Settings] - [Focus] - [Auto focus].
Method 3:Into [Settings] - [Focus] - [Manual focus].
Reference the screen picture,press the up/down of
the Navigation key to adjust the focus.When the screen
clear,stop operation.
Hold to press the Side key
09

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Mars Pro and is the answer not in the manual?

Questions and answers

Валера
March 16, 2025

всё работает,а лазер лампа проектора не светится,что делать,какая причина..

1 comments:
Mr. Anderson
March 16, 2025

If the laser lamp of the Dangbei Mars Pro projector is not lighting up, follow these steps:

1. Check Power Connection – Ensure the projector is properly plugged in and receiving power.
2. Observe LED Indicator – When pressing the power button, if the LED flashes and the fan turns on but no image appears, this indicates a potential issue.
3. Restart the Projector – Unplug the projector, wait a few moments, then plug it back in and try turning it on again.
4. Inspect Ventilation – Ensure that the air intake and exhaust vents are not blocked, as overheating could prevent the laser from activating.
5. Factory Reset – If possible, reset the projector to its default settings.
6. Contact Support – If the issue persists, the laser module may have failed, requiring professional repair or replacement.

If the projector repeatedly powers off after attempting to start, it may indicate hardware failure. Contact Dangbei customer support for further assistance.

This answer is automatically generated

Table of Contents

Save PDF