重要註意事項 - Dangbei Mars Pro User Manual

Hide thumbs Also See for Mars Pro:
Table of Contents

Advertisement

Available languages

Available languages

重要註意事項
・ 請不要用眼睛直視投影光束, 因為強烈的光束可能會傷害眼睛。
・ 請不要堵塞或遮擋裝置散熱孔, 以免影響內部零件散熱而損壞裝置。
・ 請勿向產品頂部玻璃上投擲物品 (如遙控器, 雜物等) 請勿敲擊產品頂部玻璃邊緣, 以免玻璃破損。
・ 請遠離潮濕、 曝曬、 高溫、 低壓、 磁力的環境。
・ 請勿將設備放置在易受過度灰塵和汙垢影響的區域。
・ 將設備放在平坦穩定的位置上, 不要放在易振動的地方。
・ 請為遙控器使用正確類型的電池。
・ 僅使用製造商指定或提供的附件/配件 (如專用電源適配器、 支架等) 。
・ 請勿自行拆卸設備, 只能由公司授權的人員維修設備。
・ 將設備放置在0°C-40℃的環境中使用。
・ 請勿長時間使用耳機, 耳機聲音過大會導致聽力損傷。
・ 插頭是適配器的斷開設備。
・ 與任何明亮光源一樣, 不要凝視直射光束。 RG2 IEC 62471-5:2015
72

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Mars Pro and is the answer not in the manual?

Questions and answers

Валера
March 16, 2025

всё работает,а лазер лампа проектора не светится,что делать,какая причина..

1 comments:
Mr. Anderson
March 16, 2025

If the laser lamp of the Dangbei Mars Pro projector is not lighting up, follow these steps:

1. Check Power Connection – Ensure the projector is properly plugged in and receiving power.
2. Observe LED Indicator – When pressing the power button, if the LED flashes and the fan turns on but no image appears, this indicates a potential issue.
3. Restart the Projector – Unplug the projector, wait a few moments, then plug it back in and try turning it on again.
4. Inspect Ventilation – Ensure that the air intake and exhaust vents are not blocked, as overheating could prevent the laser from activating.
5. Factory Reset – If possible, reset the projector to its default settings.
6. Contact Support – If the issue persists, the laser module may have failed, requiring professional repair or replacement.

If the projector repeatedly powers off after attempting to start, it may indicate hardware failure. Contact Dangbei customer support for further assistance.

This answer is automatically generated

Subscribe to Our Youtube Channel

Table of Contents

Save PDF