Table of Contents
Advertisement
Available languages
Available languages
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. (for companies headquartered in the U.S./Japan/
Taiwan) or under license from DTS Licensing Limited (for all other companies). DTS, DTS-HD Master Audio,DTS-HD, and the DTS-HD logo
are registered trademarks or trademarks of DTS, Inc. in the United States and other countries.© 2020 DTS, Inc. ALL RIGHTS RESERVED.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories
Licensing Corporation.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,Inc. and any use of such marks by HANGZHOU
DANGBEI NETWORK TECHNOLOGY CO.,LTD is under license. Other trademarks and trade names are those of their respective owners.
HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc.
ディ スプレイ製品の過度の青色光は、 目の疲れ、 不眠症などを引き起こす可能性があります。 反応。 この製品は、 テュフラ
インランドのハードウェアレベルのローブルーライ ト認定製品です。 認識モードは、 短波の有害な青色光を減らし、 目をあ
る程度明るく することができます倦怠感およびその他の副作用。
備考： ハードウェアレベルの低青色光は、 長波青色光源を使用して415～455nmの有害性を低減することですBlu-ray、 表示効果が影響を受けないようにします。
視力を保護するために、 長時間見ないようにすることをお勧めします。 目の疲れを感じたら、 遠くを見たり、 目の運動をしたりできます緩和する。
57
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the Mars Pro and is the answer not in the manual?
Questions and answers
всё работает,а лазер лампа проектора не светится,что делать,какая причина..
If the laser lamp of the Dangbei Mars Pro projector is not lighting up, follow these steps:
1. Check Power Connection – Ensure the projector is properly plugged in and receiving power.
2. Observe LED Indicator – When pressing the power button, if the LED flashes and the fan turns on but no image appears, this indicates a potential issue.
3. Restart the Projector – Unplug the projector, wait a few moments, then plug it back in and try turning it on again.
4. Inspect Ventilation – Ensure that the air intake and exhaust vents are not blocked, as overheating could prevent the laser from activating.
5. Factory Reset – If possible, reset the projector to its default settings.
6. Contact Support – If the issue persists, the laser module may have failed, requiring professional repair or replacement.
If the projector repeatedly powers off after attempting to start, it may indicate hardware failure. Contact Dangbei customer support for further assistance.
This answer is automatically generated