Table of Contents
Advertisement
2
Hookup
2.1
FrontPanelIndicators
2
Hookup 连接
2.1
Front Panel Indicators 前面板指示器
Thunderbolt Sync. This indicator will illuminate blue when your Quantum 4848 is
properly synced to your computer over Thunderbolt.
Thunderbolt Sync. 当你的 Quantum 4848通过 Thunderbolt正确地同步到你的计
算机时，这个指示灯将亮起蓝色。
Signal Indicators. These 32 indicators can be set to monitor either the
analog input or analog output signal from UC Surface. See Section 4.2.
Signal Indicators. 这32个指示灯可以被设置为监听 UC Surface 的模
拟输入或模拟输出信号。 见第 4.2 节。
Sample Rate Indicators. These LEDs display the currently set Sample Rate for your
Quantum 4848.
Sample Rate Indicators. 采样率指示器。这些 LED灯，显示了你的 Quantum
4848当前的采样率设置。
Power button and Sync light. The lighted ring around the power button of your
Quantum 4848 is a clock source / sync indicator. It lets you know if your unit is
receiving word clock correctly.
Power button and Sync light. 电源按钮和同步指示灯。Quantum 4848的电源按
钮周围的光环是一个时钟源/同步指示灯。这样你知道设备是否能正确地接收
字时钟。
•
Blue. When this light is blue, your Quantum 4848 is
correctly synced via Thunderbolt, word clock, or ADAT.
•
Blue. 当灯亮起蓝色时，你的 Quantum 4848通过
Thunderbolt、字时钟或 ADAT正确同步。
•
Flashing red and blue. Quantum 4848 is in the process of
trying to sync to a received clock signal.
•
Flashing red and blue. 闪烁灯为红色和蓝色。Quantum
4848正在尝试与接收到的时钟信号进行同步。
•
Red.Quantum 4848 is either not synced to your computer
or its external clock source is not present.
•
Red. Quantum 4848要么没有与你的计算机同步，要么
其外部时钟源不存在。
•
Flashing purple. The identify button is active in UC Surface.
•
Flashing purple. 闪烁灯为紫色。识别按钮在 UC Surface 中是激活的。
Power User Tip: Word clock is the timing signal with which digital devices
sync frame rates. Proper word clock sync prevents digital devices from
having pops, clicks, and distortion in the audio signal due to mismatched
digital audio transmission. In general, you will use your Quantum 4848
interface as the master clock in your studio; it provides high-quality word
clock for this purpose. However, if you would like to use another device as
the master clock, you can set the input source for clocking in UC Surface.
See Section 4.1 for details.
Quantum 4848
Owner'sManual
5
Advertisement
Table of Contents
