Table of Contents
Advertisement
6
Studio One Profesional Quick Start
6.3
Creating a New Song
2. Click on the Audio I/O Setup tab.
点击音频I/O设置标签。
3. From the Inputs tab, you can enable any or all of the inputs on your
PreSonus Quantum audio interface that you'd like to have available.
We recommend that you create a mono input for each of the inputs
on your interface. If you plan on recording in stereo, you should also
create a few stereo inputs.
在Inputs（输入）选项卡中，你可以启用 PreSonus Quantum 音频
接口上任何或所有你想用的输入。我们建议，为你的接口上的每
个输入创建一个单声道输入。如果你打算用立体声录音，你也应
该创建一些立体声输入。
4. Click on the Outputs tabs to enable any or all of the outputs on your
Quantum audio interface. In the lower right corner, you will see the
Audition select menu. This allows you to choose the output from
which you will audition audio files prior to importing them into Studio
One. In general, you will want this to be the main output bus.
点击" Outputs"标签，启用 Quantum音频接口上的任何或所有输
出。在右下角，你会看到"Audition"选择菜单。你可以选择输出，
在将音频文件导入Studio One之前，你将从该输出中进行试听。
一般来说，你希望它是主输出总线。
Quantum 4848
Owner'sManual
38
Advertisement
Table of Contents
