Table of Contents
Advertisement
Quick Start Guide
GFK-2851A
Bit
Name
Outputs
10
Disabled
11-32
Reserved
Problems during Powerup and Reset
4.2.
Certain conditions can prevent the module from becoming
operational.
Problem
Hardware failure
Invalid bootstrap
image
Invalid boot
image
Fatal powerup
initialization
Status and Diagnastic Data
1 indicates Protocol Outputs are disabled
and shall not be sent to IED device over
wire
0 indicates Protocol Outputs are enabled
and shall be sent to IED device over the
wire.
Always 0
Indication
All Indicator LEDs off.
Module unresponsive.
No Indicator LEDs turn on
and the module is
unresponsive, or
The STATUS LED is solid
green and is the only LED
on.
Fatal Error LED blink code
Description
Action
Return the module
to Emerson.
Note the blink code
and contact
Chapter 4
Sep 2019
28
Advertisement
Table of Contents
