12.6 Rotunda ......................18 12.7 Vibro Wellness 10 .................... 19 13. Repair, maintenance and cleaning ................ 22 14. Guarantee provisions ..................... 23 15. Waste management ....................23 16. Technical data ......................24 17. EC-Declaration Of Conformity ................25 18. Status of edition...................... 26 Abbreviations Instruction Manual Manual control panel...
Page 4
Store this manual in a safe place so you can use it whenever it is needed. Strictly observe the instructions to avoid damage to persons and property. DANGER 1. All electrical work to connect the SL to the mains must be carried out by a qualified professional.
SL XP 3 Electric height adjustment + backrest + inclination. 3 memory positions. Legrest via gas pressure spring. SL XP 4 Fully-electric adjustment. 3 memory positions. SL XP PODO 1 Electric height adjustment. Backrest, legrest, inclination via gas pressure spring.
SL XP PODO 2 Electric height adjustment + either backrest or inclination. Remaining functions via gas pressure spring. SL XP PODO 3 Electric height adjustment + backrest + inclination. Legrest via gas pressure spring. SL XP/PODO Hydraulic height adjustment. Hydraulic Pneumatic adjustment for backrest, legrests and inclination.
6. Unpacking Please observe the following when the SL is delivered in a cardboard: Open the top of the packaging carefully. Do not use any sharp-edged items which can damage the upholstery. Do not lift the SL but remove the top packaging first. Then you can lift and remove the outer packaging ...
9.1 Headrest You find the headrest in the cardboard of the SL. Insert the chrome pins of the headrest into the supports on the top of the backrest until they lock. You can adjust the height of the headrest using the dedicated locking levels relevant to the height of the customer.
10. Adjustment of the SL The adjustment modes are depending on the model you have opted for. Please refer to chapter 2.1. 10.1 Manual control panel The MCP is a wired control operating with low voltage (24 V). The electrically controllable functions are controlled via the MCP.
10.2 Vibro - Manual control panel If you have opted for the VIBRO-equipment, an additional manual control panel is included in delivery. Look at chapter 12.7 for further information. 10.3 Backrest Electric adjustment: The inclination can be adjusted via the MCP. The motors for the height and backrest adjustment are equipped with the SPLINE-function.
10.6 Inclination The inclination of the seat is fully adjustable. Electric adjustment: Press the relevant push button of the MCP: Pneumatic adjustment: The adjustment is performed pneumatically via a gas pressure spring. 10.7 Armrests The armrests are always in parallel to the seat. You can fold back the armrests for easy access to the seat.
10.9 Memory-functions The availability of the memory functions is depending on the model you have opted for. Please refer to chapter 2.1. The memory function saves your desired treatment positions. Depending on model, press the push buttons M1, M2 or M3. How to save a position: 1.
12. Options The availability of the options is depending on the model. 12.1 Foot control panel You can connect an additional FCP. One motor can be adjusted using the buttons of the FCP. The motor you can adjust is depending on model. For all models: When you operate two buttons simultaneously, you activate previously-set memory positions.
12.4 Heater Smart-Thermo WARNING 1. Do not use the option Smart-Thermo when your customer has got a pacemaker. is pregnant. is affected by thrombosis. suffers from pain due to unknown reasons. Apply to healthy people only. 2.
Page 16
Operation You can operate the heater using the 4 buttons ON/OFF/+/-.The setting of the heating power is indicated by a 10-level LED bar-diagram. The green LEDs 1-4 indicate low power/low temperatures. The yellow LEDs 5-7 indicate medium power/medium temperatures. The red LEDs 8-10 indicate high power/high temperatures. Heating Switch on the heater using the ON-button on the HCP.
Example for level 6 = 60 minutes total operation Press the ON-button to save your setting. Setting of the pre-heating period Each illuminated LED indicates a pre-heating period of 3 minutes. The manufacturer´s setting is 6 minutes. The max. pre-heating period available is 30 minutes.
MP3-player is equipped with 50 minutes of GEMA-fee free relaxing-music. Moreover you can load other music on the MP3-player if desired. The volume is not intended for filling rooms with sound. 12.6 Rotunda This option enables the seat to be rotated by up to 200 (Podo models) or up to (Cosmetic models).
12.7 Vibro Wellness 10 WARNING 1. Do not use the option Vibro Wellness 10 when your customer has got a pacemaker. is pregnant. is affected by thrombosis. suffers from pain due to unknown reasons. Apply to healthy people only. 2.
Page 20
Operation Starting of a massage. You can start a massage by pressing the following buttons: ON/OFF-button (1). When the massage unit is operated for the first time, the setting "individual" is activated. All massage motors operate in the manufacturer`s setting (intensity level 2; medium intensity). When the massage unit has been operated before, the previously-set program is started again (individual, pulse or wellness massage).
Page 21
When the lowest intensity (level 1) has been reached, press one of the buttons 5-9 again to switch off the relevant motor. When you switch off all massage motors, the massage is stopped. You can change from the manufacturer´s setting (intensity level 2; medium intensity) to your individual setting by pressing the individual-button (2).
We are responsible for safety and reliability of the SL under the following conditions only: 1. Repairs and modifications must be carried out by Gharieni Group GmbH or a person authorized by Gharieni Group GmbH. 2. The electrical installation of the room the SL is installed in must meet the current legal regulations at the site where the SL is operated.
Claims must be filed within 8 days after the delivery of the Gharieni SL. Apart from the cases specified in the supply agreement, the guarantee is void when: The malfunctioning is attributable to the operator.
16. Technical data Total length 144-204 cm Max. width 80 cm Width without armrests 62 cm Range of height adjustments incl. 59- 90 cm adjustable feet Hydraulic: 63-83 cm Range of height adjustments incl. 61-102 cm rollers Hydraulic: 65-85 cm Max.
17. EC-Declaration Of Conformity EC DECLARATION OF CONFORMITY Gharieni Group GmbH (Manufacturer) D-47443 Moers Gutenbergstr. 40 Germany declare that the product (Type or model, name) 2017 SL-Series is produced in accordance with the requirement specified in Low Voltage Directive (LVD) 2014/35/EU...
RESERVED. ITS REPRODUCTION OR TRANSMISSION TO THIRD PARTIES IS FORBIDDEN WITHOUT THE AUTHORISATION OF THE OWNING COMPANY. THE POWER TO PROTECT ITS RIGHTS IS RESERVED AND OFFENDERS SHALL BE PROSECUTED. Gharieni Group GmbH Am Schürmannshütt 24 D - 47441 Moers...
Need help?
Do you have a question about the SL XP and is the answer not in the manual?
Questions and answers