GHARiENi Lina Select Series Instruction Manual

GHARiENi Lina Select Series Instruction Manual

Treatment tables
Table of Contents

Advertisement

Quick Links

Treatment Tables of the
Lina Select Wood
➢ Phone:
➢ Fax:
➢ Sales department:
➢ E-mail:
➢ Web:
Area to note the
SERIAL NUMBER
The serial number of the treatment table is on the
rating plate (s. chapter 7. R
Instruction Manual
Lina Select Alu
.
).
ATING PLATE
Lina Select series
Lina Select Static
Gharieni Group GmbH
Gutenbergstraße 40
47443 Moers / Germany
+49 (0)2841/88300-0
+49 (0)2841/88300-999
+49 (0)2841/88300-300
service@gharieni.com
www.gharieni.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Lina Select Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for GHARiENi Lina Select Series

  • Page 1 Instruction Manual Lina Select series Treatment Tables of the Lina Select Alu Lina Select Wood Lina Select Static Gharieni Group GmbH Gutenbergstraße 40 47443 Moers / Germany +49 (0)2841/88300-0 ➢ Phone: +49 (0)2841/88300-999 ➢ Fax: ➢ Sales department: +49 (0)2841/88300-300 ➢...
  • Page 2 REFACE Dear customer, we would like to take this opportunity to thank you for purchasing our quality product and for the trust you have placed in us. Please read this instruction manual before you use the Lina Select for the first time.
  • Page 3: Table Of Contents

    Index 1. Safety information ..........................5 1.1 Abbreviations ..........................6 1.2 Signal words ..........................6 1.3 Safety instructions ......................... 6 2. Intended Use ............................. 11 3. Scope of Delivery ..........................11 4. Preliminary remarks .......................... 12 5. Delivery and unpacking ........................12 5.1 Delivery ............................
  • Page 4 11.1.1.1 Lina Select Alu: Locking function of the Alu Design hand control ....... 31 11.1.1.2 Lina Select Alu: memory function of the Alu Design hand control ......32 11.1.1.3 Adjustment of the working height ................34 11.1.1.4 Adjustment of the backrest ..................35 11.1.1.5 Adjustment of the inclination of the seat area ............
  • Page 5 16.1 Hand control ..........................75 16.2 Operation ..........................77 17. Reset and Initialization ........................80 17.1 Reset ............................80 17.2 Initialization ..........................80 18. Cleaning and Care ..........................83 18.1 Cleaning and care of the upholstery ..................84 18.1.1 Cleaning and care of the artificial leather ................84 18.1.2 Cleaning and care of the polyurethane material (PU)............
  • Page 6: Safety Information

    Copies of this instruction manual are available upon request. ➢ The Gharieni Group GmbH shall not be held responsible for any damages, direct or indirect, caused to people, animals or objects resulting from negligence or non-compliance with the instructions contained herein.
  • Page 7: Abbreviations

    (mains cable/mains plug). In case of unauthorized changes or manipulations, any warranty of the Gharieni Group GmbH is excluded. 5. Do not connect the Lina Select to the mains if the treatment table itself or the power cable or the plug are visibly damaged. RISK OF...
  • Page 8 6. The power supply cable shall not be placed below the Lina Select, except it is expressly permitted by the Gharieni Group GmbH. RISK OF ELECTRIC SHOCK! 7. The power cord must not be placed near the motor during connection or repositioning as it can be damaged while operating the motor.
  • Page 9 4. The Lina Select must not stand on the power cord. Ensure that the cord is not damaged when moving the treatment table. Do not step on the cord. Do not stretch the cord. 5. Always ensure that the power cord is not bent or squeezed during installation.
  • Page 10 RISK OF ELECTRIC SHOCK! RISK OF DAMAGE! 27. Any repairs and maintenance work must be carried out by qualified professionals authorized by the Gharieni Group GmbH only! RISK OF ELECTRIC SHOCK! RISK OF FIRE! 28. Do not use a steam cleaner for cleaning. RISK OF ELECTRIC SHOCK! 29.
  • Page 11 32. Always ensure that no parts of the body or items are between the parts of the Lina Select while adjusting the lying position. RISK OF CRUSHING! 33. Do not use the supporting structure as a footrest. RISK OF CRUSHING! 34.
  • Page 12: Intended Use

    Read the instructions very carefully and only operate the treatment table in its intended use as described to protect you and your customers from danger: ❖ The Gharieni Lina Select is no medical device. ❖ The Lina Select is a treatment table. It is suitable for facial treatments, hair removal, pedicure, manicure, body treatments, etc.
  • Page 13: Preliminary Remarks

    4. Preliminary remarks ❖ The Gharieni treatment table Lina Select is subject to the highest safety and quality standards. ❖ Before initial operation, please check that all components are present and that they are not visible damaged. ❖ Make sure that the socket for the treatment table is properly grounded and has the correct mains voltage and mains frequency, see rating plate.
  • Page 14: Transport, Space Requirement And Installation

    ➢ The headrest is in the same cardboard. The headrest must be installed (see chapter 11.2.1 H EADREST 6. Transport, space requirement and installation 6.1 Transport Always consider the dimensions of the Lina Select. A transport of the Lina Select can be severely affected to some extent due to unfavourable environment conditions.
  • Page 15: Space Requirement

    6.2 Space requirement ❖ Before installation, ensure that there is sufficient free space for the Lina Select relevant to its total length. ➢ Min. free space required for the Lina Select (standard upholstery): Length = min. 202.00 cm * Width = min. 80.00 cm. ➢...
  • Page 16: Rating Plate

    Do not make the rating plate illegible! Do not remove the rating plate! Non-compliance will expire the warranty! If you wish to contact the Gharieni customer service regarding your treatment table, we recommend taking a photo of the rating plate previously (e.g. using a mobile phone or a digital camera).
  • Page 17 QR-C (Figure similar, position differs...
  • Page 18 Figure shows form that opens in the Internet browser of the device after the QR code is scanned.
  • Page 19 Figure shows form that opens in the Internet browser of the device after the QR code is scanned.
  • Page 20 Figure similar: option window for adding a file. Appearance may vary depending on the device and operating system.
  • Page 21: Upholstery And Base Versions

    9. Upholstery and base versions 9.1 Upholstery ❖ The treatment tables of the Lina Select line are available in two upholstery versions. 9.1.1 Standard upholstery (artificial leather) ❖ The of the Lina Select is a comfortable and high- STANDARD UPHOLSTERY quality upholstery;...
  • Page 22: Base Versions

    Fig. similar: colour, design and equipment may vary depending on model. 9.2 Base versions ❖ The treatment tables of the Lina Select line are available in three base versions. 9.2.1 Lina Select Alu ❖ The base of the Lina Select Alu consists of a solid aluminium-clad foot, which offers a decorative eye-catcher thanks to the wood or artificial leather applications on the sides.
  • Page 23: Lina Select Wood

    9.2.2 Lina Select Wood ❖ The base of the Lina Select Wood consists of a solid and elegant wooden foot. Fig. similar: colour and upholstery may vary depending on model. ASE WITH WOOD DECOR 9.2.3 Lina Select Static ❖ The base of the Lina Select Static is anchored firmly into the floor by screws. This kind of installation offers ample legroom and maximum stability.
  • Page 24: Operation

    Lina Select. RISK OF TIPPING! RISK OF DISINTEGRATION! RISK OF INJURY! 10.1 Characteristics ❖ The Gharieni Lina Select is a treatment table which with a lifting column and three actuators (s. chapter 10.2 N ) with which you can...
  • Page 25: Number Of Actuators

    10.2 Number of actuators ❖ The treatment tables of the Gharieni Lina Select series are equipped with a lifting column and three actuators with which you can easily adjust the desired positions electrically using the hand control or the optional foot control.
  • Page 26: View (Example: Lina Select Wood)

    10.4 View (example: Lina Select Wood) Fig. similar: colour, upholstery and design may vary depending on model. (supporting structure) Mechanism for the electrical HEIGHT ADJUSTMENT ➢ the work height electrically adjustable for all base versions. ➢ see also chapter 11.1.1.3, 11.1.2.1 resp. 11.1.3.3 A DJUSTMENT OF THE WORKING HEIGHT Mechanism of the electrical adjustment of the...
  • Page 27 RMRESTS ➢ padded on both sides; foldable. ➢ see also chapter 11.2.2 A RMRESTS EGREST ➢ the legrest is electrically adjustable for all base versions. ➢ see also chapter 11.2.4 L EGREST ➢ see also chapter 11.1.1.6, 11.1.2.4 resp. 11.1.3.6 A DJUSTMENT OF THE LEGREST OOTREST...
  • Page 28: Electrical Adjustments

    11. Electrical adjustments ❖ The electrical adjustments of the Lina Select are carried out using a hand control. ❖ The electrical adjustments can also be carried out using an optionally available foot control; s. chapter 12. F OOT CONTROL INA SELECT ALU OPTIONAL ) and chapter 13.
  • Page 29: Alu Design Hand Control Of The Lina Select Alu

    11.1.1 Alu Design hand control of the Lina Select Alu Alu Design hand control: Lina Select Alu only! The Alu Design hand control of the Lina Select Alu is equipped with four pre-programmed and four individually adjustable and storable memory positions.
  • Page 30 Fig. similar: modifications are possible. ➢ Push buttons for the adjustment of the WORKING HEIGHT (white lettering / arrows). A / A1 ➢ Push buttons for the retrieval of the pre-programmed MEMORY « » and « » (grey lettering); POSITIONS HEAD AREA FOOT AREA s.
  • Page 31 (level 2 button / grey lettering) TART BUTTON ➢ The resets the Lina Select to the basic position or START BUTTON has no function ➢ The basic position cannot be changed. ➢ Available in level 2 only. (level 1 button / black lettering) OCKING BUTTON ➢...
  • Page 32: Lina Select Alu: Locking Function Of The Alu Design Hand Control

    11.1.1.1 Lina Select Alu: Locking function of the Alu Design hand control ❖ The Lina Select Alu is equipped with a of the Alu Design LOCKING FUNCTION hand control to protect the treatment table from unauthorized access. ELECT HOW TO ACTIVATE THE LOCKING FUNCTION 1.
  • Page 33: Lina Select Alu: Memory Function Of The Alu Design Hand Control

    11.1.1.2 Lina Select Alu: memory function of the Alu Design hand control ❖ The hand control of the Lina Select Alu has four pre-programmed memory positions (memory function on level 2: HEAD AREA FOOT AREA SEAT AREA ); s. table « P ».
  • Page 34 PROGRAMMED MEMORY POSITIONS ➢ This memory position is perfectly EMORY POSITION suitable for treatments in the head area « » HEAD AREA (e. g. for facial treatments, etc.). ➢ This memory position is perfectly EMORY POSITION suitable for treatments in the foot area «...
  • Page 35: Adjustment Of The Working Height

    ELECT OW TO RECALL A PREVIOUSLY SAVED MEMORY POSITION 1. Press the SHIFT BUTTON 2. The LED goes on ( LEVEL 3. Press and hold the desired (hotkey: M 1 MEMORY BUTTON - M 4) until the saved treatment position has been M 1 - M 4 reached.
  • Page 36: Adjustment Of The Backrest

    11.1.1.4 Adjustment of the backrest ❖ The inclination of the of the Lina Select can also be adjusted using BACKREST the hand control. ❖ For adjustment of the press the pair of buttons « B / B1 » of the BACKREST hand control;...
  • Page 37: Adjustment Of The Legrest

    11.1.1.6 Adjustment of the legrest ❖ The inclination of the of the Lina Select can also be adjusted using the LEGREST hand control. ❖ For adjustment of the press the pair of buttons « D / D1 » of the hand LEGREST control.;...
  • Page 38: Hand Control Without Memory (Lina Select Wood / Static)

    11.1.2 Hand control without memory (Lina Select Wood / Static) ❖ You can control the lifting column and the three actuators by pressing and holding down the corresponding push button. ❖ The hand control has 6 buttons. ❖ Adjustment of the working height, the backrest, the inclination of the seat area and the legrest (buttons T 1 - T 4) is done using the double-tap system.
  • Page 39: Adjustment Of The Working Height

    LOCK BUTTON ➢ The locks or unlocks the hand control / LOCK BUTTON the drives. (optional equipment): BUTTON FOR THE HEATING SYSTEM ➢ Using this button you can switch on the heating system, adjust it in 3 levels and switch it off again. ➢...
  • Page 40: Adjustment Of The Backrest

    ❖ Extracting of the adjustable feet (up to 3 cm) or the installation of castors (approx. 8 cm / optional accessories) will increase the a bit. WORKING HEIGHT ❖ Usually, the Lina Select is entered from the side. Fold back the armrests for easy access.
  • Page 41: Adjustment Of The Legrest

    Fig. similar: colour, upholstery and design may vary depending on model. 11.1.2.4 Adjustment of the legrest ❖ The inclination of the of the Lina Select can also be adjusted using the LEGREST hand control. ❖ For adjustment of the press button « T 4 » of the hand control.; LEGREST s.
  • Page 42: Lina Select Wood / Static: Locking Function Of The Hand Control Without Memory

    Fig. similar: colour, upholstery and design may vary depending on model electrically adjustable LEGREST manually extendable FOOTREST 11.1.2.5 Lina Select Wood / Static: Locking function of the hand control without memory ❖ The Lina Select Wood / Static is equipped with a LOCKING FUNCTION protect against unauthorized use.
  • Page 43: Memory Hand Control (Lina Select Wood / Static)

    ACTIVATION OF THE LOCKING FUNCTION 1. To release, press the button (T 5) on the hand LOCK control twice in quick succession (double-tap) and hold it down for approx. 3 seconds. 2. The successful unlocking is again confirmed by an acoustic signal and the LED below the button of the hand control goes out.
  • Page 44 ➢ Button for adjustment of the WORKING HEIGHT ➢ Button for adjustment of the BACKREST ➢ Button for adjustment of the INCLINATION OF THE SEAT AREA ➢ Button for adjustment of the LEGREST PROGRAM BUTTON P ➢ 1 moves the Lina Select to the fixed PROGRAM BUTTON P entry position.
  • Page 45 PROGRAM BUTTON P ➢ 3 moves the Lina Select to the fixed PROGRAM BUTTON P pedicure position. ➢ The pedicure position cannot be changed. PROGRAM BUTTON P ➢ 4 moves the Lina Select to the fixed PROGRAM BUTTON P massage position (backrest retracted to the max, seat tilt retracted to the max, legrest extended to the max).
  • Page 46 SYMBOLS FOR THE DOUBLE TAP SYSTEM ❖ Adjustment of the working height, the backrest, the inclination of the seat and the legrest (buttons T 1 - T 4) is done using the double-tap system. ❖ Storing the two individually adjustable and storable positions and de-activating the locking function is also done using the double- tap system.
  • Page 47: Locking Function

    11.1.3.1 Locking function ❖ The Lina Select Wood/Static is equipped with a function LOCKING to protect the treatment table from unauthorized use. ❖ By default, no automatic locking is set. You can decide for yourself whether to change this. The currently running heating cycle is not affected by an automatic locking.. ❖...
  • Page 48 Example: 30 minutes is set as the automatic locking time. You want to change to the automatic locking time 60 minutes. Press the corresponding buttons simultaneously and keep them pressed for approx. 6 seconds until feedback about the now set automatic locking time 60 minutes is given through flashing of all LEDs of the hand control and beeps.
  • Page 49: Memory Function Of The Hand Control

    UNLOCKING THE DRIVES MANUALLY 1. To unlock the drives, press the button (T 11) LOCK on the hand control twice in quick succession (double-tap) and keep it pressed for about 2 seconds. 2. The successful unlocking is confirmed by an acoustic signal and the LED above the button on the hand control is switched off.
  • Page 50: Adjustment Of The Working Height

    RECALLING MEMORY POSITIONS Press and keep the corresponding button M1 or M2 MEMORY pressed until the stored treatment position is reached. 11.1.3.3 Adjustment of the working height ❖ For adjustment of the press button « T 1 » of the hand WORKING HEIGHT control;...
  • Page 51: Adjustment Of The Inclination Of The Seat Area

    ❖ Press the button once and hold it down to raise the backrest. Press the button twice and hold it down to lower the backrest. WARNING! While adjusting, always check that fingers cannot be caught between the backrest and the seat. RISK OF CRUSHING! 11.1.3.5 Adjustment of the inclination of the seat area ❖...
  • Page 52: Footrest

    Fig. similar: colour, upholstery and design may vary depending on model. EGREST 11.1.3.6.1 Footrest ❖ As well as the you can pull out the (9) of the HEADREST FOOTREST LEGREST to increase its length. ❖ Furthermore, you can remove the (9), so you can work on the heel FOOTREST area (pedicure).
  • Page 53: Further Adjustments

    11.2 Further adjustments 11.2.1 Headrest ❖ You find the headrest (6 / s. fig in chapter 10.4 V ) in the packaging of the Lina Select ❖ Insert the chrome pins of the headrest into the supports on the top of the backrest until they lock.
  • Page 54: Armrests

    11.2.2 Armrests ❖ The armrests (7 / s. fig in chapter 10.4 V ) are always in parallel to the seat. ❖ The armrests can be folded back for easy lateral access to the seat and for treatments in massage position (prone position); s. fig. below. ❖...
  • Page 55: Legrest

    ® IRBACK The amount of air pumped in determines the hardness of the ®. IRBACK of the A ® AND PUMP IRBACK When the customer is placed in prone position, do not use the A ®. IRBACK ➢ You can deflate the A ®...
  • Page 56: Foot Control Lina Select Alu (Optional Equipment)

    Fig. similar: colour, upholstery and design may vary depending on model. 12. Foot control Lina Select Alu (optional equipment) ❖ An optionally available foot control can be connected additionally together with the hand control. ❖ The foot control is equipped with a left and a right footswitch-unit (s. below; fig.
  • Page 57 ELECTION OF A FUNCTION R 1 / RIGHT FOOT SWITCH UNIT ➢ serves as when you have selected the memory SAVE BUTTON function. R 2 / RIGHT FOOT SWITCH UNIT ➢ selects the (height, backrest, seat inclination, leg ACTUATORS section) or the (lower diode) step by MEMORY FUNCTION step.
  • Page 58 OW TO SAVE A TREATMENT POSITION MEMORY POSITION 1. Set the desired position as normal. 2. Press the push button R 2 of the right foot control unit repeatedly until the lower diode « » on the connector goes on; s. above; fig. 2. 3.
  • Page 59: Foot Control Lina Select Wood / Static (Optional Control)

    OW TO DEACTIVATE THE LOCKING FUNCTION 1. Press and hold the push button R 2 until an acoustic signal sounds. 2. Immediately after this acoustic signal (within 3 seconds) press and hold the push button L 1 until another acoustic signal sounds. 3.
  • Page 60 LEFT PART OF THE FOOT CONTROL RIGHT PART OF THE FOOT CONTROL LEFT PART OF THE FOOT CONTROL WORKING HEIGHT DOWN BACKREST DOWN RIGHT PART OF THE FOOT CONTROL INCLINATION OF THE SEAT AREA DOWN LEGREST DOWN...
  • Page 61 LEFT AND RIGHT PART OF THE FOOT CONTROL M 1: EMORY OSITION ➢ Saving the memory position: Left section of the foot control, press pedal 2 and right section of the foot control, press pedal 3 simultaneously twice (double-tap system) and keep them pressed until an acoustic signal confirms the successful saving.
  • Page 62: Foot Control With Bluetooth

    13.1 Foot control with Bluetooth ❖ A foot control with Bluetooth can be connected as an option in addition to the hand control. ❖ The foot control enables the adjustment of the basic functions and the approach of the two fixed positions P1 to P4. In addition, the heating system can be operated and the bed can be unlocked.
  • Page 63 NOTICE! The Bluetooth foot control may have to be woken up by pressing any button before use, as it switches to sleep mode after approx. three seconds. NOTICE! To switch on the heating system with the first heating level, to change to the next heating level or to switch off the heating system, the buttons of the Bluetooth foot control must be held down for approx.
  • Page 64 LEFT AND RIGHT PART OF THE FOOT CONTROL ➢ Press the left part of the foot control, button 1 and the right part of the foot control, button 3 simultaneously once (single tap) and keep them (Entry pressed until the position is reached. position) THE ENTRY POSITION CANNOT BE CHANGED ➢...
  • Page 65: Heating System Smart Thermo 3 (Lina Select Alu) [Optional Equipment]

    14. Heating system Smart Thermo 3 (Lina Select Alu) [optional equipment] BBREVIATION MART HERMO EATING SYSTEM MART HERMO ❖ The lying surfaces of the treatment tables of the Lina Select line can be heated to maximise the treatment comfort. The Smart Thermo is a pre-programmed and fully automatic heating system which allows a comfortable operation.
  • Page 66: Operation

    WARNING! The cables of the models incl. the heating system Smart Thermo 3 are between the upholstery and the underframe. The upholstery may only be removed by persons authorized by the Gharieni Group GmbH. 14.1 Operation ❖ You can operate the heating system using the 4 buttons (s. fig. below:...
  • Page 67 ONTROL PANEL OF THE HEATING SYSTEM MART HERMO : -ON- UTTON : -OFF- UTTON EMPERATURE SELECTION BUTTON IME SELECTION BUTTON 2 blue LEDs 2 green LEDs 2 yellow LEDs 2 orange LEDs 2 red LEDs...
  • Page 68 UTTON ❖ Press this button to switch on the Smart Thermo. 1. When the Smart Thermo is switched on, it starts heating at the maximum heating / power level for 5 minutes (level 5: the 2 red LEDs (E) are illuminated). 2.
  • Page 69 The selected heating / power level will be displayed on the LEDs above the operating buttons: Level 1 blue LEDs (A) Press button one time Level 2 green LEDs (B) Press button two times Level 3 yellow LEDs (C) Press button three times Level 4 orange LEDs (D)
  • Page 70 XAMPLE You wish to set a medium heating / power level (level 3) of 30 minutes. Please proceed as follows: 1. Switch on the Smart Thermo by pressing the button -O 2. Then select the . Press this button TEMPERATURE SELECTION BUTTON repeatedly until the two yellow LEDs (C) are illuminated (s.
  • Page 71: Heating System Lina Select Wood / Static (Optional Equipment)

    15. Heating system Lina Select Wood / Static (optional equipment) ❖ The upholstery surface of the Lina Select Wood / Static can be heated to increase comfort. It is a pre-programmed and fully automatic heating system which allows comfortable operation. This heating system is integrated in the upholstery of the bed and works with modern microprocessor technology.
  • Page 72 WARNING! 1. Do not use the heating system in the following cases: ➢ on customers with pacemakers. ➢ on pregnant women. ➢ on customers with thrombosis. ➢ on customers suffering from pain of unknown cause. 2. Use only on healthy people. 3.
  • Page 73: Operation

    15.1 Operation ❖ The heating system is operated using the button (T 12) of the hand control. ❖ For operation using the optional foot control or the foot control with Bluetooth, s. chapter 13. FOOT CONTROL INA SELECT WOOD STATIC 13.1 OPTIONAL EQUIPMENT AND CHAPTER...
  • Page 74 There are three heat / power levels to choose from Visualization via Heating Heating level an LED (diode) output single impulse Push button Power on / for 0.3 seconds, 30 % button once level 1 interval 1 second double impulse, Push this lights up for 0.3 level 2...
  • Page 75 For operation with the optional foot control with cable and with the Bluetooth foot control, you also have a choice of three heat / power levels: Visualization via Heating Heating level LED (diode) output Pedals / single impulse Push pedals / Power on / buttons for 0.3 seconds,...
  • Page 76: Vibro Wellness 10 (Optional Equipment)

    16. Vibro Wellness 10 (optional equipment) For all treatment tables of the Lina Select line, the V IBRO ELLNESS is optional available for an additional charge. FUNCTION 10 is a pleasantly massaging vibration system and includes IBRO ELLNESS many various adjustment options. WARNING! 1.
  • Page 77 Fig. similar / fig. serves as an example only. FF BUTTON NDIVIDUAL BUTTON ULSE MASSAGE BUTTON ULSE BUTTON ELLNESS MASSAGE BUTTON AVE BUTTON NTENSITY BUTTONS SHOULDER AREA BACK AREA NTENSITY BUTTONS FUSELAGE AREA BACK AREA NTENSITY BUTTONS PELVIC AREA BACK AREA NTENSITY BUTTONS LEG AREA NTENSITY BUTTONS...
  • Page 78: Operation

    16.2 Operation OW TO START A MASSAGE ➢ You can start a massage by pressing the FOLLOWING BUTTONS FF BUTTON ❖ When the massage unit is operated for the first time, the setting INDIVIDUAL activated. ❖ All massage motors operate in the manufacturer`s setting (intensity level 2 / medium intensity).
  • Page 79 ➢ When the massage unit is operated for the first time, the manufacturer´s setting is activated (intensity level 2 / medium intensity). ➢ Now you can set each motor to three levels of intensity using the INTENSITY (5) - (9). BUTTONS ➢...
  • Page 80 ➢ When you press the W (4) a fourth time, the first programme will AVE BUTTON be started again. ➢ You can select three levels of speed with the (10). BUTTONS ➢ You can select three levels of intensity with the (5) - (9).
  • Page 81: Reset And Initialization

    17. Reset and Initialization 17.1 Reset Press and hold buttons the buttons A and A1 (A + A1 = R [reset]) resp. buttons T 11 and T 12 of the relevant hand control (s. figure below) simultaneously for approx. 10 seconds until the signal tone ends. Then move the lifting column and the actuators as described below (initialization).
  • Page 82 2. The other actuators must be set to min. position; that means: a. The lifting column for adjustment of the must be set WORKING HEIGHT to its lowest setting! Use button A1 of the relevant hand control / s. fig. below.
  • Page 83 HAND CONTROL MEMORY HAND CONTROL Lina Select Alu Lina Select Wood / Static The adjustment (initialisation) must be carried out manually, i.e. each actuator must be run individually. Please note that you keep the buttons pressed for 2-3 seconds  longer after reaching the end position.
  • Page 84: Cleaning And Care

    18. Cleaning and Care WARNING! Disconnect the Lina Select from the mains (unplug) before cleaning and maintenance. RISK OF ELECTRIC SHOCK! RISK OF FIRE! WARNING! Regularly remove any dust build-up from the mains plug, the safety socket and all electrical plug connections, e.g. with a commercially available vacuum cleaner.
  • Page 85: Cleaning And Care Of The Upholstery

    18.1.2 Cleaning and care of the polyurethane material (PU) ❖ Clean the PU material using a soft cloth only provided with a small amount of a suitable cleaning agent; also available from Gharieni: s. chapter 21. UPHOLSTERY CARE AND CLEANING AGENTS NOTICE! The soft upholstery of the Lina Select is made of Polyurethane (PU).
  • Page 86: Malfunctions (Possible Causes And Troubleshooting)

    19. Malfunctions (possible causes and troubleshooting) ALFUNCTION OSSIBLE CAUSE ROUBLESHOOTING LL ACTUATORS DO NOT WORK 1. No connection to the mains. 1. Check the connection status. 2. The power supply cable is damaged. 2. Power supply cable must be replaced (please contact the customer service).
  • Page 87: Repair

    5. Check the power cord regularly for signs of damage. 6. If the mains cable is damaged, it may only be replaced by Gharieni Group GmbH, or a customer service authorized by Gharieni Group GmbH or a qualified specialist (electrical engineer).
  • Page 88: Optionally Available Accessories

    20. Optionally available accessories  For detailed information regarding the optionally available accessories (s. below) please contact our sales department. Our team is happy to help! 20.1 Castor set ❖ A with brakes for a treatment table of the Lina Select line is CASTOR SET optionally available for an additional charge.
  • Page 89: Neckrest "Dentalax

    ➢ colour collection of the Ferrari Stamskin® Top artificial leather (optional artificial leather cover)  For detailed information regarding the XL please contact our EXTENSION sales department. Our team is happy to help! 20.3 Neckrest "Dentalax" ❖ Our popular N “D ”...
  • Page 90 ❖ Our covers are available in three different colours: white / choco and crème. ❖ You can order the relevant cover when purchasing the treatment table. OSMETIC VERSION ODO VERSION Fig. similar: fig serves as an example only!  For detailed information regarding the right size and suitable version of the covers as well as the compatibility with your treatment table please contact our sales department.
  • Page 91: Upholstery Care And Cleaning Agents

    21. Upholstery care and cleaning agents 21.1 Mikrozid ® Sensitive (alcohol-free) ® ❖ We recommend Mikrozid Sensitive for gentle and thorough care and cleaning of the upholstery. ® ❖ Mikrozid Sensitive removes bacteria, fungi, and viruses (e.g. HBV, Rota, Vaccinia etc.). ®...
  • Page 92 For more information, visit the manufacturer’s website at the following link: https://www.schuelke.com/intl-en/products/mikrozid-sensitive-liquid.php...
  • Page 93: Skai Cleaner

    21.2 Skai cleaner ❖ For gentle and thorough care and cleaning of the artificial leather upholstery we additionally recommend Skai cleaner. ❖ Skai cleaner is available in a 200 ml spray bottle. ❖ Especially suitable for cleaning artificial leather. : 79427 KAI CLEANER TEM NUMBER...
  • Page 94: Conditions Of Transport, Storage, And Operation

    22. Conditions of transport, storage, and operation 22.1 Ambient conditions for transport and storage from -10 °C to +50 °C (ambient temperature) EMPERATURE from 20% to 90% (at 30 °C non-condensing) ELATIVE HUMIDITY 22.2 Ambient conditions for operation from +5 °C to +40 °C (ambient temperature) EMPERATURE from 35% to 65% (at 30 °C non-condensing) ELATIVE HUMIDITY...
  • Page 95 & RIVES INCL CONTROLS INA SELECT ALU WOOD TATIC Power supply 100 - 240 V AC, 50 - 60 Hz Power consumption Output: approx. 350 W Output voltage 24 V DC Duty cycle (actuator) 10 % max. 2 min. continuous operation / 18 min.
  • Page 96: Disposal

    9. If suitable containers are not available at your residential area, dispose of these materials at a suitable municipal collection point for waste-recycling. 10. Receive more detailed information from your retailer, municipal facilities or: Gharieni Group GmbH ➢ Phone: +49 (0)2841/88300-0 ➢...
  • Page 97: Warranty

    25.1 Warranty period The following warranty provisions apply to new goods worldwide: The Gharieni Group GmbH offers for all treatment tables of the Lina Select series → a 10-year warranty for their metal frames → a 5-year warranty for their actuators and →...
  • Page 98: Ec-Declaration Of Conformity

    26. EC-Declaration Of Conformity EC-Declaration of Conformity Gharieni Group GmbH Gutenbergstraße 40 47443 Moers / Germany hereby declare, in sole responsibility, that, due to its design and construction, the device named below complies with the relevant, fundamental safety and health requirements of the EU.
  • Page 99: Status Of Edition

    OWNING COMPANY. THE POWER TO PROTECT ITS RIGHTS IS RESERVED AND OFFENDERS SHALL BE PROSECUTED. RODUCTION PICK ALES AND HOWROOM AND REPAIR Gharieni Group GmbH Gharieni Group GmbH Gutenbergstraße 40 Am Schürmannshütt 24 47443 Moers / Germany 47441 Moers / Germany...

This manual is also suitable for:

Lina select aluLina select woodLina select static

Table of Contents