Installation - AJAX ReX 2 User Manual

Inside any premises with the temperature and humidity beyond the range of
permissible limits. Doing so may cause the device to malfunction or not
work properly.
Close to radio interference sources: less than 1 meter from the router and
power cables. This could result in the loss of connection with the hub or
devices connected to the range extender.
In places with low or unstable signal strength if Ethernet is not used as an
alternative or main communication channel. This could result in the loss of
connection with the hub or devices connected to the range extender.

Installation

Before installing the range extender, make sure that you have selected the
optimal location and that it complies with the requirements of this manual.
When installing and operating the device, follow the general electrical safety
rules for using electrical appliances and the requirements of electrical safety
regulations.
To install ReX 2:
1. Fix the SmartBracket mounting panel with the bundled screws. When using
other fasteners, make sure they do not damage or deform the panel. When
attaching, use at least two xing points. To make the tamper react to
attempts to detach the device, be sure to x the perforated corner of
SmartBracket.