AJAX ReX 2 User Manual page 8

4. Select ReX 2. The loop (zone) number is displayed at the very bottom of the
page.
The ReX 2 loop (zone) number is also available in the Groups menu (Ajax app →
Devices → Hub → Settings
number, select the group in which the range extender is located. The Device
Number corresponds to the loop (zone) number.
Compatible hub models
ReX 2 requires a hub for operation. List of compatible hubs:
Hub 2 (2G)
Hub 2 (4G)
Hub 2 Plus
Hub Hybrid (2G)
Hub Hybrid (4G)
Connection to other hubs radio signal range extenders ocBridge Plus
uartBridge is not provided.
Connection
The range extender only works with
range extenders, as well as to
Before connecting, make sure that:
1. The Ajax app is installed.
2. An account is created
3. The required hub has been added to the Ajax app.
4. This hub is enabled and at least one room has been created for it.
→ Groups). In order to nd out the loop (zone)
,
compatible Ajax hubs
uartBridge and
.
,
. Connection to other hubs,
ocBridge Plus , is not provided.
and