Dehumidifying - Mitsubishi Electric MJ-EV240HP-H Instruction Manual

Dehumidifying

The operation mode can be selected accordingly to the situation.
1
Press
2
Select the operation mode.
To select the dehumidifying mode and operate
Press
To set the humidity and operate
Press
3
Press
<To stop operation>
Press
This dehumidifier remembers the operation mode. Even if the power plug is disconnected or the operation turned off, the
dehumidifier will start operation with the same settings as the previous time.
Operation stops when the tank is full. To restart operation, remove water from the tank. If a continuous drainage hose is set,
the dehumidifier will operate continuously.
In the case of a power outage during operation, the dehumidifier will restart operation upon restoration in the operation
mode before the power outage.
If DRYING INSIDE operation is set, DRYING INSIDE operation will be carried out after the dehumidifier operation is
stopped.
P18
12
3 2
Blip
to begin operation.
The operation mode switches each time the button is pressed.
P13–14
Blip
The set humidity changes each time the button is pressed.
P13
Blip Blip
70 65
and select the swing direction.
Blip
The operation mode indicator goes out.
Inverter indicator goes out.
P20
2 1
The operation mode is displayed.
Inverter indicator lights.
Louvre opens, and blows air.
Blip Blip
Blip Blip Blip Blip
60 55 50％
P16
Blip Blip Blip