Dehumidifying; Auto - Mitsubishi Electric MJ-E130AL-H Instruction Manual

Dehumidifying

There are 5 operation modes to choose from: HIGH, LOW, MILDEW GUARD, EASY and AUTO.
(HIGH, LOW, EASY ...

AUTO

2
1
Press
2
Press
level.
The selected AUTO
mode is highlighted.
Display
and current
humidity setting.
When displaying
press
is pressed, the humidity setting
changes.
After 3 seconds, the display
returns to the current humidity
display.
Pressing MODE switch can switch to AUTO
Information
mode.
<To stop operation>
Press
14
15
, MILDEW GUARD ...
It is recommended for setting the humidity level of dehumidification.
1
Blip
12
.
to set the humidity
Blip
. Each time the switch
Blip
12
.
16
)
AUTO
In order to maintain the humidity level, the unit
operates intermittently after automatic switching of
air flow rate.
When the current humidity is lower than the set
value, the unit will stop (both the blower/louvre
will stop). It will restart if the humidity level is
higher than the set value.
For 6 minutes after the power is on, the unit
will begin operating regardless of the room
humidity.
Sometimes it would take a long time to bring down
the humidity depending on opening and closing
frequency of the room door or the size or shape of
,
the room.
<To confirm the humidity setting>
Press
After displaying
, the current
humidity setting is displayed.
After 3
seconds
After approximately 3 seconds,
the display returns to the
current humidity display.