Specifications - Global Water AquaWave Classic 75GPD Installation, Operation & Maintenance Manual

Reverse osmosis (ro) system
Table of Contents

Advertisement

OTHER IMPORTANT INFORMATION
Please note that the lifetime of the filters as well as their replacement interval strongly depends on the inlet water
quality, the amount of water consumed, the sediment and chlorine content etc.
System should be isolated from water supply and disconnected from power if not used for more than 1 week. If not
used for a period of 1 month or more RO water storage tank should be emptied.
REPLACEMENT FILTERS AND PARTS
Filters are consumables and are not covered by the warranty.
Only use GWS approved replacement filters. Product warranty is void if non-GWS approved replacement filters are
used.
Only use GWS approved spare parts. In the case of any failure of the pump, electric adapter or any other
replaceable part of the system, the replacement product must be approved by Global Water Solutions or an
authorized GWS distributor. Product warranty is void if non-GWS approved spare parts are used.

SPECIFICATIONS

Model
Dimensions
Weight
Tube Size
Operation Pressure
Maximum Pump Pressure
Power Input
Recommended Water Temperature
Maximum TDS
Maximum Hardness
Maximum Chlorine
Maximum Iron
Maximum Manganese
Maximum Turbidity
PH
This system is designed to purify. It should not be installed on other water sources, such as mountain spring
water or ground water.
5 Stage Reverse Osmosis System
AquaWave™ Classic
37 x 27 x 47 cm | 14.6 x 10.6 x 18.5 in
9.5 kg / 21 lb
1/4"
1.4 - 4 bar | 20 - 60 psi
6.9 bar | 100 psi
AC 220V~240V 50/60Hz
5 - 38°C / 41 - 100°F
1000 ppm
290 ppm (17 grains per gallon)
1.0 ppm
0.3 ppm
0.05 ppm
2 NTU
6.0~8.5
3

Advertisement

Table of Contents
loading

Table of Contents