Table of Contents
Advertisement
AFTER CHANGING THE FILTERS OF YOUR RO SYSTEM
•
Turn on the 1/4" water supply valve.
•
Put the 1/4" water supply valve in "ON" position.
•
If the RO faucet was turned off, turn it back on. Water should begin to trickle out of the RO faucet.
•
Let the RO water run like this for about 1 hour. It is now flushed and ready for use.
•
Turn off the RO faucet and open the RO tank ball valve so that RO water can enter the tank.
FILTER CHANGE INTERVAL
The suggested filter change interval is a non-binding recommendation based on years of experience. It represents
the use of the RO system with an average inlet water quality and hence does not necessarily reflect the optimal
filter change interval plan based on your water quality. For more information please visit our website at www.
globalwatersolutions.com, send us an email to watertreatment@globalwatersolutions.com, contact our authorized
Filtration stage
Stage 1
Stage 2
Stage 3
Stage 4
Stage 5
Filter type
PP1005 - 5-micron PP (polypropylene)
M01-GT-BW - Granular Activated Carbon (GAC)
M11-GT-WN - GAC + 5-micron PP
R2W75GPD-Replacement RO Membrane
K02-GT-WW-TP - Post-RO GAC
5 Stage Reverse Osmosis System
Change interval
every 3 months
every 3 to 6 months
every 3 to 6 months
every 12 months
every 3 to 6 months
15
Advertisement
Table of Contents
