Cleaning and service
•
•
•
•
•
Only trained personnel with proper tools and test equipment should perform the tests and
repairs described in this manual. Unauthorized service may void the monitor warranty.
Turn the power off and unplug the power cord before cleaning or service. Completely remove
any moisture before reconnecting the power cord to the mains outlet.
Do not touch any exposed wire or conductive surface while any cover is removed and the
monitor is energized. The voltages present can cause injury or death.
NOTE! The monitor is always internally powered when the batteries are connected.
Always perform an electrical safety check and a leakage current test on the monitor after
service.
General Service Guide
7
Document No. M1031508